 |
|
 |
|
faqs cleanPANEL 1. Can I order cleanPANEL tongue and grooved? a. No. It is too thin to tongue and groove 2. Are other cleanPANEL colours available to order? a. Only 2 colours are available from stock. Other colours are available to order on a minimum order of 100 sheets and with a 14 week lead time. 3. What is the fire rating of cleanPANEL? a. Class 1 surface spread of flame 4. Can I order black, gold or chrome extrusions for cleanPANEL? a. Yes, but these colours are only held in stock in 2500mm lengths 5. How do I clean cleanPANEL? a. cleanPANEL should be wiped clean with a damp, clean cloth and a mild, non-abrasive detergent. |
||||||
|
|
|
|
|
|
|
6. How do I cut cleanPANEL? |
||||
|
|
|
|
|
 |
 |
|||
|
|
|
|
|
Power Saw with Fine Tooth Blade. Decorative face down |
Handsaw with Fine Tooth Blade. Decorative face up |
|||
|
|
|
|
|
BE CAREFUL TO MATCH UP TILE LINES |
||
|
|
|
7. How do I fit panels at 45°? a. Fix 2 Type Q End Caps to the edge of each tilePANEL, butt together at 45° and apply silicone sealant between the profiles and the wall line. |
||
|
|
|
 |
||
|
|
|
8. What is the distance to subtract from the wall to a panel when using a Type Q internal corner profile? a. 7mm. Dimensions of all tilePANEL profiles are shown below |
||
|
|
|
 |
||||||||
 |
||||||||
TYPE Q End Cap |
||||||||
 |
||||||||
 |
||||||||
|
|
|
|
|
|
|
|
|
TYPE R Mid Joint |
||||
TYPE S External Corner |
||||
|
|
|
|
|
|
|
|
